|
|
Price
List
|
The easy to build Mark III Classic is designed
primarily as a STOL class aircraft. It has generous wing area,
big flaps, ailerons and powerful engine options that make
operation from short fields possible. With gross weight of a
1000 lbs. and slow stall speed, it qualifies as an
experimental kit build light sport aircraft... Perfect for
Sport Pilot. .
|
Pictured above is a flight of three on a beautiful fall
day.
|
HIGH PERFORMANCE
The Mark III Classic may be powered by a wide variety of
engines from the 52 hp Rotax 503 to the 100 hp Rotax 912S or
Jabiru 2200. To handle the more powerful and heavier engines,
the Mark III Classic was designed with the larger
diameter (6") and thicker walled wing spars along with
more ribs and a stronger drag strut.
|
The empty weight of a Mark III Classic with a Rotax 503 and
minimal equipment is about 500 pounds. With the side-by-side
dual controls, full enclosure, upholstery package, hand drum
brakes, Rotax 582, and a 2-blade prop, the Mark III Classic
weighs 550 pounds. A fully equipped Mark III Classic with the
Rotax 912, battery, brakes and full cockpit enclosure would be
about 560 pounds. As you can see, the Mark III Series can
accommodate a wide variety of needs. If anything is unclear to
you, please call us.
STURDY CONSTRUCTION
For strength and durability in airframe structures,
aluminum and steel are superior. The heart of the Mark III
Classic, the fuselage cage, is made from strong, factory
welded 4130 chrome-moly steel. We also use 4130 steel in all
high stress areas.
SUPERB HANDLING
The Mark III Classic, like all Kolb aircraft, utilizes
traditional cable and push-pull tube control systems. The
Mark III Classic feels solid even in turbulent air. The extra
stiffness of the wings and tail, plus the higher wing
loading (added weight of the structure), makes for a very solid
feeling airplane. The half-span ailerons have a good roll
authority at higher speeds while still being powerful enough
at lower speeds to retain roll control even through a stall.
Although Kolb aircraft are easy to fly and have gentle
flight characteristics, they are also high performance
aircraft. We recommend training or some transition
training before attempting flight in our aircraft. |
Pictured above is a Mark III Classic built by Brian Blackwood
|
Optional hydraulic brakes with individual toe pedals
provide for sure stops and a tighter turning radius.
Hydraulic brakes allow the Mark II Classic to be stopped
in very tight areas.
The Mark III Classic has been certified in England
to the rigorous BCAR-s standard.
GREAT VISIBILITY
The fact is, better visibility makes for more enjoyable
flying. The pusher configuration of the Mark III Classic
provides
the vastly superior visibility that Kolb aircraft have become
known for. There is 360 degree visibility from the cabin
and a gap seal between the wings over the cabin is clear lexan
so you can see straight up.
|
Pictured above is Brian and Kelly Blackwood
enjoying the Mark III Classic.
|
FOLDING WINGS & TAIL
Like all Kolb aircraft, the Mark III Classic has folding
wings and tail which allow for easy storage or trailering. The tail folds up and the wings fold back
along the fuselage in about 15 minutes by one
person. Everything stores right on the airframe.
|
ROOMY CABIN
The Mark III Classic has a spacious 45 inch cabin (35
inches at the hip) and with the adjustable rudder pedals, even
very big people can be comfortable. The optional full enclosure
doors are bulged out to allow for shoulder room (41 inches
wide) for the occupants and can be removed easily for real
open air flying. The rear engine configuration eliminates exhaust fumes and
reduces noise levels.
|
 |
| SPECIFICATIONS |
|
| Seating |
2 side by side |
| Wing Span |
30 ft. |
| Wing Area |
160 sq. ft. |
| Length |
22 ft., 6 in. (same folded) |
| Height |
6 ft. 4 in.. (same folded)
75 in. with 3-blade prop
Height and width are based on
standard wooden prop. Larger prop with more blades add to the height
and width of the aircraft. |
| Width (folded) |
6 ft. 10 in. at wheels
66 in. with 2-blade prop
Height and width are based on
standard wooden prop. Larger prop with more blades add to the height
and width of the aircraft. |
| Empty Weight |
475 lbs. (typically) |
| Gross Weight |
1000 lbs
Weight is approximate and may
vary . Manufacturer's tolerances in tube wall thickness, engine size,
and doping and painting of the aircraft are a few of the many items
which may introduce weight variations.. |
| Fuel Capacity |
10 gal. |
| Load Factor |
+4 -2 g (limit) |
| Stall Speed |
38 mph
41 mph |
| Vne |
100 mph |
| Build Time |
Approx. 450 hrs.
|
| Factory Quick Build offered by Custom Air |
Approx. 230 hrs
|
| Full Assembly Option Available |
Builder assist program with Custom Air. |
|
|
| ROTAX
ENGINE |
503 |
582 |
912 |
| |
solo/dual |
solo/dual |
solo/dual |
| Reduction Unit |
Gearbox, 2.58:1 |
Gearbox, 2.58:1 |
|
| Propeller |
66 in. diameter two-blade wood |
66 in. diameter two-blade wood |
70 in
.diameter two-blade wood |
| Propeller |
62 in. diameter three-blade wood |
64 in. diameter three-blade wood |
70 in. diameter three -blade wood |
| Takeoff Distance |
200 ft.
250 ft. |
150 ft
200 ft. |
150 ft
175 ft. |
| Rate of Climb
is based on a 175
lb. pilot. |
800 fpm (s)
650 fpm (d)
|
1000 fpm (s)
800 fpm (d)
|
1300 fpm (s)
1100 fpm (d) |
| Cruise Speed |
69 mph (70% power) |
70mph (70% power) |
80 mph |
| FACTORY QUICK
BUILD |
These
structures/operations are done |
| Wings |
2 Built |
| Ailerons |
2 Built |
| Vertical Stabilizer |
1 Built |
| Horizontal Stabilizers |
2 Built |
| Elevators |
2 Built |
| Rudder |
1 Built |
| Wing Alignment |
Wings are attached and aligned with fuselage |
| Lift Struts |
Are assembled to correct length |
| Tail Alignment |
Tail surfaces are aligned and attached to
fuselage tube |
| Tail Wire Bracing |
Made to length with ends swedged |
| Tail Hinges |
All hinges for horizontal stabilizers,
elevator, rudder, aligned, and temporarily installed. |
| Fuselage " H " Section |
Installed |
|
|
| MARK
III CLASSIC FABRIC
COVERING KIT |
|
| From Aircraft Technical Support |
$1870
(subject to change) |
| Hazardous shipping & handling |
$ call |
|
Fabric covering and finish paint are NOT included in kit prices.
Kolb Fabric Covering Kits are supplied by Aircraft Technical
Support, Inc. Call Jim and Dondi Miller toll free at 1-877-877-3334, or visit their web site.
The Kolb Covering Kit uses the Poly-Fiber process. The Kit includes fabric,
fabric tapes, fabric cement (Poly-Tak), fabric coatings (Poly-Brush), solvents,
special large head fabric rivets, a Rib Rivet Drilling Fixture, Poly-Fiber Manual,
and an instructional video. Finish Paint is not included in the Fabric Covering
Kit, however, 50 Poly-Fiber colors are available through Aircraft Technical
Support. As Kolb enthusiasts, Jim and Dondi Miller are available to help
you with fabric covering and painting questions. They conduct seminars
and fabric covering workshops, and operate a Fabric Covering Shop.
Call them anytime toll free at 1-877-877-3334 for technical help! |
|
|
Let's have some fun!!
You can build your aircraft Wish List!
Just click here.
|
|
|
|
|
